NEDC Tech Blog
Filter By Category:
EMI/RFI Absorber Tapes by 3M Company | Die Cutting | Kiss Cutting
3M is a company with diverse product lines. They manufacture a variety of different tapes, thermally conductive tapes, VHB Tapes, and more. Many of their tapes are catered towards electronic markets, as handheld devices become a commonplace item in all of our lives....
(ECATTs) Electrically Conductive Transfer Tapes for EMI Gaskets
When manufacturing electrically conductive gaskets, usually an electrically conductive tape may be required. This allows for die-cut parts to have good electrical conductivity in all directions(isotropic, XYZ) throughout the part including the adhesive. These tapes...
Closed Cell Viton Sponge Gasket | Fluid Resistant Gasketing
At NEDC we cut many different types of gasketing materials. Some of our most popular selections are fuel resistant materials. Materials such as fluorosilicone, epichlorohydrin, nitrile, and Viton® we hear about a lot. When an easily compressible option is required...
Gap Pad VO Soft, VO Ultra Soft, VO | Gap Filling Pads
At NEDC, we manufacture lots of gap filling pads. In this blog, we discuss some thermal gel pads. All of these Gap Pad materials are used to isolate electronics while providing great thermal properties. Oftentimes customers get confused thinking Gap Pad VO, Gap Pad...
Flame Retardant Gaskets | Silicone Rubber | Silicone Sponge | Silicone Foam
We manufacture all types of gaskets at NEDC. One of the more common requests is for flame retardant gaskets. Customers look for UL94 listed materials because their product is also UL listed. This makes it easier to meet their requirements. UL 94 discusses flame...
Crosslinked Polyethylene Foam Gaskets | Waterjet-Cut
At NEDC we die-cut many different types of foam products. One of the more common foams we cut is crosslinked polyethylene foam(XLPE). XLPE foam is an abbreviation for crosslinked polyethylene foam. Gasketing is one of the main ways we use this material. Properties of...
EMI/RFI Shielding Tapes | Copper – Aluminum – Tin-Plated
At NEDC, we are a 3M converter. For that reason, we see a lot of different types of tapes that we can die-cut into custom shapes. When it comes to EMI/RFI Shielding Tapes, there are EMI/RFI Shielding Fabric Tapes, and EMI Shielding Metal Foil Tapes. In this blog, we...
EPDM Gaskets | Foam | Sponge | Solid
EPDM Rubber is one of the most common materials seen in the gasket industry. The proper name for EPDM is ethylene propylene diene monomer. As a gasket manufacturer, we probably use the word EPDM everyday. We use it for tape strippings, foam, or solid gaskets. ...
High Thermal Conductivity Gap Pads | Low Modulus | High Compliance | Super-Soft
Design Engineers are constantly looking for the highest thermal conductivity thermal pad they can find. In this blog we will be discussing 5 “High Thermal Conductivity Gap Pads”. Keep in mind Thermal Conductivity is Not Everything. That is why we have included some...
Rubber Stripping | Strip-N-Stick | Foam Tape | Rubber Tape
NEDC supplies a number of different types of products to its customers. One of the more common types of materials is stripping. These products come in a tape/roll format to allow the user to easily apply into the application. Adhesive Backing All of these strippings...
Low Compression Set Gaskets- Silicone, Urethane Foam
Compression set with gaskets is a constant concern because it eventually creates sealing issues with the interface of the gasket and the surface it is being pressured against. Compression set is a concern because the gasket will lose thickness and lose its ability to...
Thermal Gap Filling Pads | Self-Attaching Methods
At NEDC we cut a lot of thermal gap filling pads. One of the frequent questions we get is “Why are many thermal pads not available with pressure sensitive adhesive?” The answer comes back to the whole purpose of the thermal pad itself. Attachment Methods Thermal...
Electrically Conductive Silicone Gasket – EMI/RFI Shielding
At NEDC, we cut a lot of interesting materials. One of the most commonly used gasketing materials are EMI/RFI Shielding Gaskets. They feature high levels of electrically conductivity imparted by their fillers, and low electrical impedance. Many of these gasket...
High Temperature Gaskets- Silicone, Fluorosilicone, other Elastomers
In the gasket industry, we deal with a lot of materials. There are gasketing materials for just about every need. There are some gasket materials that can survive thousands of degrees for a few seconds. There are some that can handle hundreds of degrees continuously...
Environmental Foam/Sponge Gaskets
At NEDC we specialize in custom foam and sponge gaskets for all purposes. One of the common foam/sponge gaskets we make are environmental gaskets. These are gaskets we consider for outdoor use and environmental sealing. These gaskets do not have the luxury of high...
Die-Cut Silicone Products- Gaskets, Thermal Pads, Insulators, Absorbers
At NEDC, we would be remiss to not mention most of our products revolve around silicone-based materials. As a result, products that we offer a lot of die-cut silicone products. Out of our 5 core products, 4 are normally silicone based. In this post, we picked out 4...
Fungus Resistant Gaskets
At NEDC we cut a lot of unique materials. One of the more common materials NEDC cuts is fungus-resistant gasketing materials. Nowadays, a lot of people recognize that fungal growth should be a concern when building assemblies. This is well documented because designers...
Kapton Tape- Die Cutting, Kiss Cutting Custom Shapes
Some people get confused about Kapton® Film vs. Polyimide Film. At NEDC we cut both. However, 3M offers both Kapton® Tape, and polyimide tape. The difference comes down to a brand. That brand is by DuPont. DuPont holds the registered trademark for Kapton®. 3M offers...
3M VHB Tapes- Information, Properties, Die Cutting
At NEDC, we like to think we are problem solvers. At 3M Company, they do the same. Since NEDC is an authorized 3M converter we die-cut many tape products of theirs. As far as permanent fasteners go, 3M VHB Tapes are known globally and recognized as the leader in...
Double Coated Tape 3M 9731- Acrylic/Silicone
We are an authorized 3M Converter at NEDC. As a result, we work with many of their tape products. These include VHB Tapes, EMI Shielding Tapes, Transfer Tapes, and many others. One of the tapes we work with often is 3M 9731 Double Coated Tape. This tape has the great...
PORON® Urethane Foam- Properties, Information, Cutting
My furnace at home is 95% fuel efficient. I was told this is among the best money can buy. After removing the lid to the furnace I noticed a strip of foam that looked very familiar. It was PORON® Urethane Foam. PORON® Urethane Foams are among the many different...
Sponge Gaskets- ASTM D1056, Types, Classes, Grades
At NEDC, we commonly offer different gasketing solutions. Many in the industry organize cellular products in their head a few different ways. However, the specification ASTM D1056 organizes them by type, class, and then grade. Most of the materials characteristics can...
Fluorosilicone Gaskets- Solid, Sponge, and Electrically Conductive
Fluorosilicone(FVMQ) is one of the materials that has many uses in the industry. Any die-cutter worth their weight is familiar with it. The high cost reflects its customizability, and versatility. Fluorosilicone is the blue gold of the industry. Fluorosilicone...
Nomex 410 Die Cut Parts
At NEDC we cut many electrically insulating materials. Our most common one is Nomex®. We see is Nomex® 410 the most often. Nomex® is a strong material that is made of Nomex® fiber. It is naturally flame resistant, and extremely resistant to heat. Nomex® is a very...
Thermal Pads- Non-Electrically Isolating, High Durability, Soft-Tack
I always make the analogy that thermal pads are like ice-cream, there's something for everybody. In this blog, I wanted to discuss some of the qualities of thermal pads that are available but not as sought after or not preferred as some of the other qualities. The...
Broadband Absorber- Eccosorb MCS
At NEDC, we cut many high-performing materials. One common material that we see is ECCOSORB. However, one of the more common ECCOSORB products NEDC sees is ECCOSORB MCS. This broadband RF microwave absorbing material is widely used in many industries across...
Rogers COOLSPAN® TECA, Laser-Cutting
NEDC laser-cuts many materials with its laser-cutting machines. One of the most frequently cut materials at NEDC is frozen epoxy films. Many of these film materials offer thermal and/or electrical conductivity. COOLSPAN® TECA from Rogers Corporation is a thermally and...
R10460 Silicone Sponge Die-Cut/Waterjet Cut
As discussed in many of the posts that we write, different materials are what make up NEDC’s DNA. The beauty of die-cutting lies in the different materials and the versatilities they may offer. One material that offers significant versatility is the flame retardant...
Sil-Pad 900S Thermal Pad | Thin Thermal Pad | Custom Die Cut Shapes
NEDC has been die-cutting thermal pads since its inception in 1982. One of the more popular products Sil-Pad 900S by Henkel’s Bergquist. It is one of the most commonly die-cut materials NEDC converts. This product is part of the Sil-Pad family, featuring great thermal...
Custom Die Cutting
As I always say, every print is like meeting a new person. Similar to DNA, every print is unique to the material, shape, size, tolerance, and specifications. At NEDC, our business model is built around the idea that whatever design our customers come up with, if we...
All of the information presented above is believed to be factual and accurate; however, NEDC is not liable for any design or application utilizing this information.
New England Die Cutting
Capabilities/Products
Quick Links
Popular Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.