by Garrett Abare | Apr 5, 2020 | Die Cutting Blog, Electrical Insulators Blog, Gaskets Blog, Laser Cutting Blog, RF Absorbers Blog, Waterjet Cutting Blog
At NEDC, we laminate a ton of different materials. One of the tapes we use most commonly is 3M 467MP Transfer Tape. We laminate it to thin films, and gaskets to help customers in their assembly process. It is one of my favorite adhesive transfer tapes. In this blog, I...
by Garrett Abare | Apr 5, 2020 | Die Cutting Blog, Electrical Insulators Blog, Epoxy Films Blog, Gaskets Blog, Laser Cutting Blog, RF Absorbers Blog, Thermal Pads Blog, Waterjet Cutting Blog
At NEDC we operate many pieces of cutting machinery. We operate state of the art conventional die cutting machines, laser cutting machines, and waterjet cutting machines. In this blog post, we thought we would delineate the differences between all of these machines so...
by Garrett Abare | Apr 2, 2020 | Die Cutting Blog, Electrical Insulators Blog, Gaskets Blog, Laser Cutting Blog, Waterjet Cutting Blog
Viton®(FKM) fluoroelastomer is a well known material that is used across industries for its fuel, and chemical resistance. NEDC manufactures custom Viton® Gaskets out of Viton® fluoroelastomer material. What many people do not know is that there are a few different...
by Garrett Abare | Apr 1, 2020 | Die Cutting Blog, Gaskets Blog, Laser Cutting Blog, Waterjet Cutting Blog
One of the common questions we get at NEDC is what types of materials are available for EMI Gasketing materials. Since apertures can vary from thin to thick, and compression values can vary from extreme pressure to hardly any at all, we thought we’d present on one...
by Garrett Abare | Mar 29, 2020 | Die Cutting Blog, Gaskets Blog, Laser Cutting Blog, Waterjet Cutting Blog
When manufacturing electrically conductive gaskets, usually an electrically conductive tape may be required. This allows for die-cut parts to have good electrical conductivity in all directions(isotropic, XYZ) throughout the part including the adhesive. These tapes...
by Garrett Abare | Mar 25, 2020 | Die Cutting Blog, Electrical Insulators Blog, Gaskets Blog, Laser Cutting Blog, Waterjet Cutting Blog
At NEDC we die-cut many different types of foam products. One of the more common foams we cut is crosslinked polyethylene foam(XLPE). XLPE foam is an abbreviation for crosslinked polyethylene foam. Gasketing is one of the main ways we use this material. Properties of...
