Rapid Prototyping
Concept:
- Contact NEDC’s Rapid Prototyping Department with your concept.
- Provide any and all pertinent information such as drawings, dimensions, application, and material requirements.
Design:
- Our Rapid Prototyping Department will take all the information supplied and offer suggestions and input.
- Material recommendations can be made, whether the material is conductive or non-conductive.
Test Samples:
- Samples will be manufactured and given to customer for testing.
- Preliminary pricing will also be provided.
Develop/Modify:
- Pending test results, NEDC will finalize and confirm the design for production.
- If modifications are needed then necessary changes will be made to the design of the part.
Production:
- Once samples and design have been approved, we will provide a quote with the requested quantities with pricing and delivery.
- An order is placed with NEDC, and our Customer Service team works with you to ensure all delivery needs are met with the quality they require.
Popular Blog Post
Frozen Epoxy Films in Stock at NEDC!
NEDC is a converter of frozen epoxy films to make custom preforms for customers to buy. For that reason, NEDC has many frozen films in stock. These include: Ablefilm 5025E Ablefilm 561K Ablefilm CF3350 Ablefilm 566K And others. We wanted to just get it out there on...
Previous Posts
Die-Cutting vs Laser Cutting, Epoxy Preforms: Part 2
I had a customer call the other day, saying he heard that laser cutting...
Super-Soft Silicone Rubber Gaskets | Tight-Tolerance/High-Temperature
At NEDC, Custom Silicone Rubber Gaskets are a common product we sell....
Double Coated Tape 3M 9731- Acrylic/Silicone
We are an authorized 3M Converter at NEDC. As a result, we work with many...
All of the information presented above is believed to be factual and accurate; however, NEDC is not liable for any design or application utilizing this information.
New England Die Cutting
Capabilities/Products
Quick Links
Popular Blog Posts
Can you use a Thermal Pad/Gap Pad more than Once?
My blogs largely originated from the various questions I have gotten from customers over the years. This includes the most popular ones. One question I realized I get an awful lot is : “Are Gap Pads Reusable?” Heres my short answer, “It depends, but I wouldn’t ever”....
Die-Cutting vs Laser Cutting, Epoxy Preforms: Part 2
I had a customer call the other day, saying he heard that laser cutting was better than die-cutting for frozen epoxy preforms. Heres the thought I had in my head “Why does this keep coming up!?” Heres my thought, and then I’m going dive into every advantage, and...
Super-Soft Silicone Rubber Gaskets | Tight-Tolerance/High-Temperature
At NEDC, Custom Silicone Rubber Gaskets are a common product we sell. Included in that category are the Super-Soft Silicone Rubber Gaskets that are available. When I think soft gaskets, typically below 40A durometer would be considered soft. However, when I think of...