Thermal Pads Blog
Q-Pad 3 aka SIL PAD TSP Q2000 | Thermal Grease Replacement
At NEDC, thermal pads are our specialty. However, oftentimes customers are looking for a thermal pad that is a grease replacement, that isn’t damaged by reflow solder baths. To be honest, Q-Pad 3 is a unique product for this reason. Q-Pad 3 is a fiberglass reinforced...
ESD Gaskets | Neoprene/Silicone Gaskets, Pads | Custom Die-Cut
At NEDC, we manufacture gaskets, and custom pads. One of the more interesting materials offer is electrostatic dissipative(ESD) gasketing. Out of those materials we manufacture ESD Gaskets. What is ElectroStatic Dissipative Gasketing? It might be a good idea to start...
Sil-Pad 980 aka SIL PAD TSP 1680 | Custom Die-Cut Shapes
At NEDC, we cut a whole bunch of different types of thermal pad gap filling materials. Sil-Pad 980 has a unique application list where it's used. Properties of SIL PAD TSP 1680, aka Sil-Pad 980 SIL PAD TSP 1680 has great cut-through resistance. It is silicone-based...
High Dielectric & Cut-Through Strength Thermal Pads | Polyimide Reinforced Thermal Pad
At NEDC, we cut a number of thermal pads. Through all the thermal pads we sell- we see a large amount of diversity in their make-up. Most thinner thermal pads utilize fiberglass reinforcement. However, there is an alternative such as polyimide that offers great...
UL Ratings Available | Gaskets, Absorbers, Thermal Pads, Insulators
NEDC cuts a lot of materials for different customers. One thing we wanted to assemble was every material we deal with that had a UL Rating, or UL approved materials. We've categorized this into materials generally used for gasketing, absorbers, thermal pads,...
GAP PAD TGP HC5000 Color Change | Violet to Natural Gray
6 years ago(I can’t believe that was 6 years ago), I wrote a blog introducing Gap Pad HC5.0, you can find that blog here. Anyways, I remember taking a picture on the day I wrote that blog, and telling everyone I was wearing violet button up shirt(the color of HC5.0)...
Thermal Pad Comparisons for Substitutes | TGP 3000/TGP 5000
As the supply chain issues have taking a toll on the whole world, there is a lot of discussion around finding alternatives for some materials. Since NEDC supplies thermal pads, I wanted to point out a few materials that can be reviewed for similarities when trying to...
3M 200MP Tape Series | Double Coated/Transfer/Double Linered | Die-Cut/Laser-Cut
It is not often you hear someone say they have a “favorite tape”. However as an authorized 3M converter, I’m not afraid to say it- I love 200MP by 3M. 3M 200MP is an adhesive that is coated onto a number of carriers, and liners that yield a number of different tape...
Sil-Pad Die-Cut Configurations | SIL PAD TSP
At NEDC, we cut a lot of custom parts. However, it is much more common to cut parts that are made to a specification or standard. In our M83528/004XDDD post, we talked about Standard Connector Gaskets. In this blog post, we talk about Standard Sil-Pad Configurations....
Sil- Pad 800 AKA SIL PAD TSP 1600 | Die-Cutting
Sil-Pad 800 is a thermally conductive pad that belongs to the Sil-Pad family. It is a thermally conductive silicone rubber that is reinforced with a fiberglass carrier. It is electrically isolating while also having a compliant surface conducive to use in both high,...
Sil-Pad 400 AKA SIL PAD TSP 900 | Die-Cutting
When we are talking about Sil-Pad products, one of my favorites is Sil-Pad 400. Sil-Pad 400 is also known as SIL PAD TSP 900 now. It sounds weird to say, but the refined feeling of the gray silicone pressed into the fabric produces a uniform feeling across the pad...
GAP PAD 1500 aka GAP PAD TGP 1500 | High-Compliance Pad | Die-Cutting
At NEDC, Gap Pads/Thermal Pads are a core product. One uncommon type of material in the thermal pad world is an unreinforced pad. Normally, thermal pads are reinforced to aid with handling. It is unusual for a thermal pad to have enough continuity to be easy to handle...
GAP PAD TGP HC3000 aka Gap Pad HC3.0, Die-Cut, Custom Cut Shapes
Whenever a customer comes to me looking for a middle of the road option available in today's world, that is: -Soft & Compliant -Low Outgassing -Available in many thickness options(ranging from .010'' to .125'' in thickness) -Economical, yet good thermal...
EVs(Electric Vehicles) & Thermal Pads
In February, I just took possession of an electric vehicle. It got me thinking, electric vehicles use a lot of thermal interface material, don’t they? Batteries are the life, and blood of electric vehicles. They control the entire car; air conditioning, heating,...
Henkel Announces New Ultra-Low Modulus Product | GAP PAD TGP 12000ULM
Henkel has launched the Gap Pad TGP 12000ULM under their Bergquist product line. This silicone material is filled with thermally conductive particles to impart the highest thermal conductivity to date of 12 W/m-K. This is an exciting development for the Gap Pad...
Thermal Pad/Choosing a Thermal Pad – Case Study
In our last blog, we discussed 3 tips to choosing a thermal gap filling pad. We wanted to show how that worked in a previous application. The below is a case study that utilizes a few of those tips. The Problem: A customer came to us looking for an thermal management...
3 Tips for Selecting a Thermal Gap Filler Pad!
Many of our customers are using thermal pads nowadays. With another year in the books, the electronics used this year are at an all-time high. This requires more cooling! To finish off the year, we thought we would make a blog about a few tips on choosing a thermal...
What do we make at NEDC?
A lot of times when I’m explaining to someone what I do for a living, I almost feel like saying “I play with giant cookie cutters all day.” We Use Giants Cookie Cutters, why say this? To most people it seems hard to explain that our customers just send me a print and...
Outgassing of Thermal Pads | ASTM E595 | TML & CVCM
One of our tips for selecting a thermal pad is selecting a thermal pad that has a lot of data about it. Some of these data points include, thermal conductivity, volume resistivity, flame rating, Young's Modulus, and more. However, one common question when it comes to...
Tolerancing for Thermal Pads | Thickness, Diameter, Linear Dimensions
One difficult thing for the team is when a tight tolerance is put on a thermal interface material. Some of our customers understand, gap filling materials are putty like. Alternatively, thin thermal pads are usually coatings coated on a reinforcement layer such as...
Thermally Conductive Silicone Sponge | Custom Shapes
At NEDC, we are all about thermally conductive gap filling pads. A unique thermal gap filler that can double as a gasketing material is Thermacool R10404 Thermally Conductive Silicone Sponge. This closed-cell silicone sponge rubber gap filling material is not only...
Rogers’ Thermabond – Thermally Conductive Adhesive Preforms
At NEDC, we cut a lot of adhesive preform products into finished cut parts. One of the more common adhesive products that NEDC cuts is Thermabond® Silicone Electronic Adhesive products by Rogers Corporation. Properties of Thermabond Adhesive Preforms A common demand...
Thermal Pads | Filling Thick Gaps with Thermal Interface Pads
Oftentimes, customers come to us looking for thermal solutions. The problem with filling thick gaps when trying to solve a thermal solution is many typical thermal interface solutions won’t be a good fit to solve the problem. Reasons other Thermal Management Products...
Phase Change Thermal Materials(PCMs) | Die-Cut | Waterjet Cut
At NEDC we are a custom manufacturer of thermal interface pads. Many of these gap filling thermal pads are used to remove heat out of the application. PCM materials offer an advantage that other thermal interface products cannot seem to do. Phase Change Materials work...
Advantages of Thermal Pads over Thermal Pastes
In one of our other blogs, we mentioned other different types of thermal pads and their advantages. Many thermal pads are used as replacements for thermal pastes. However, we never discussed different advantages that thermal pads have over thermal putties/greases. Of...
Tips for Choosing a Tape for your Adhesive Backed Gasket!
At NEDC we manufacture a lot of different components for aviation, military, medical and electronics. One of the common things we see is trouble with adhesive transfer tapes. In this blog post, we wanted to discuss some tips on choosing the right tape for your...
PGS Thermal Graphite Sheets | Custom Die-Cut Shapes
Thermal management is a core competency at NEDC. One of the core products we die-cut is graphite-based thermal interface material. Panasonic has a line that features incredible thermal performance! Panasonics PGS(Pyrolytic Highly Oriented Graphite Sheet) Thermal...
Soft Gaskets | Soft – Extremely Soft Gasketing Materials
Gaskets come in an incredible variety of materials. One thing about gaskets is it can always get softer. When compression is not an asset, usually the answer is to go even softer. For that reason, I thought I would write a blog about what options are out there when it...
Die Cut Gaskets vs. Laser Cut Gaskets vs. Waterjet Cut Gaskets
At NEDC we operate many pieces of cutting machinery. We operate state of the art conventional die cutting machines, laser cutting machines, and waterjet cutting machines. In this blog post, we thought we would delineate the differences between all of these machines so...
Thermally Conductive Tapes – Bond-Ply | Die Cutting
At NEDC, double-sided tapes are a common material we deal with. Essentially a double-sided tape is material that has adhesive on both sides. This is with a carrier in the middle of two adhesive coatings of material. In some cases, thermal conductivity is a requirement...
All of the information presented above is believed to be factual and accurate; however, NEDC is not liable for any design or application utilizing this information.
New England Die Cutting
Capabilities/Products
Quick Links
Popular Blog Posts
Can you use a Thermal Pad/Gap Pad more than Once?
My blogs largely originated from the various questions I have gotten from customers over the years. This includes the most popular ones. One question I realized I get an awful lot is : “Are Gap Pads Reusable?” Heres my short answer, “It depends, but I wouldn’t ever”....
Die-Cutting vs Laser Cutting, Epoxy Preforms: Part 2
I had a customer call the other day, saying he heard that laser cutting was better than die-cutting for frozen epoxy preforms. Heres the thought I had in my head “Why does this keep coming up!?” Heres my thought, and then I’m going dive into every advantage, and...
Super-Soft Silicone Rubber Gaskets | Tight-Tolerance/High-Temperature
At NEDC, Custom Silicone Rubber Gaskets are a common product we sell. Included in that category are the Super-Soft Silicone Rubber Gaskets that are available. When I think soft gaskets, typically below 40A durometer would be considered soft. However, when I think of...