Electrical Insulators Blog
Epichlorohydrin Gaskets | Foam/Sponge/Solid Rubber
Fuel Resistance is one of the chief concerns that customers have when they are designing a gasket. As with many gasketing materials there is a solid rubber form as well as a sponge/cellular form of this gasketing material. Epichlorohydrin Rubber is often used in...
VHB Tape 5958FR, Flame Retardant | Die Cutting, Laser Cutting
In the rubber industry flame retardancy is a big topic of discussion and is often required by certain applications. While NEDC does deal with these polymers on a regular basis, we also deal with tapes. Flame retardancy has become such a necessity that the experts in...
UL Ratings Available | Gaskets, Absorbers, Thermal Pads, Insulators
NEDC cuts a lot of materials for different customers. One thing we wanted to assemble was every material we deal with that had a UL Rating, or UL approved materials. We've categorized this into materials generally used for gasketing, absorbers, thermal pads,...
Die-Cut Custom Washers | Rubber, Plastic, Non-Metallic
When you think of Washers you typically think of the thing that you put on before a screw right before you're about to tighten it? We do- but we envision something plastic, or rubber gasketing material. At NEDC we make a different type of washer on a daily basis. What...
Polyurethane Gaskets | Waterjet-Cut/Die-Cut
A lot of the materials that we cut are built for rugged applications. Polyurethane Gaskets stand out when it comes to a tough gasketing material. However, its good to note - this blog is about polyurethane gasketing materials that are one solid piece- not polyurethane...
Flame Retardant Solid Silicone Rubber | Die-Cutting | Waterjet-Cutting
It is often known that a lot of the silicone foams, and silicone sponges that NEDC converts into gaskets are flame retardant. Recently, we did a blog on flame retardant silicone foam/sponge materials. Most gasketing materials are decently fire retardant- however the...
HT-800 Silicone Foam | Die-Cut/Waterjet Cut Gaskets
My favorite silicone foam material is easily HT-800 by Rogers Corp. If someone were to ask why.. (no one is asking) but I’ll explain to all of my 50,000 blog readers why its my favorite silicone foam material. I wrote a blog a few years ago, on silicone foam gaskets,...
GAP PAD TGP HC5000 Color Change | Violet to Natural Gray
6 years ago(I can’t believe that was 6 years ago), I wrote a blog introducing Gap Pad HC5.0, you can find that blog here. Anyways, I remember taking a picture on the day I wrote that blog, and telling everyone I was wearing violet button up shirt(the color of HC5.0)...
Thermal Pad Comparisons for Substitutes | TGP 3000/TGP 5000
As the supply chain issues have taking a toll on the whole world, there is a lot of discussion around finding alternatives for some materials. Since NEDC supplies thermal pads, I wanted to point out a few materials that can be reviewed for similarities when trying to...
3M 200MP Tape Series | Double Coated/Transfer/Double Linered | Die-Cut/Laser-Cut
It is not often you hear someone say they have a “favorite tape”. However as an authorized 3M converter, I’m not afraid to say it- I love 200MP by 3M. 3M 200MP is an adhesive that is coated onto a number of carriers, and liners that yield a number of different tape...
Sil-Pad Die-Cut Configurations | SIL PAD TSP
At NEDC, we cut a lot of custom parts. However, it is much more common to cut parts that are made to a specification or standard. In our M83528/004XDDD post, we talked about Standard Connector Gaskets. In this blog post, we talk about Standard Sil-Pad Configurations....
Sil- Pad 800 AKA SIL PAD TSP 1600 | Die-Cutting
Sil-Pad 800 is a thermally conductive pad that belongs to the Sil-Pad family. It is a thermally conductive silicone rubber that is reinforced with a fiberglass carrier. It is electrically isolating while also having a compliant surface conducive to use in both high,...
Sil-Pad 400 AKA SIL PAD TSP 900 | Die-Cutting
When we are talking about Sil-Pad products, one of my favorites is Sil-Pad 400. Sil-Pad 400 is also known as SIL PAD TSP 900 now. It sounds weird to say, but the refined feeling of the gray silicone pressed into the fabric produces a uniform feeling across the pad...
GAP PAD 1500 aka GAP PAD TGP 1500 | High-Compliance Pad | Die-Cutting
At NEDC, Gap Pads/Thermal Pads are a core product. One uncommon type of material in the thermal pad world is an unreinforced pad. Normally, thermal pads are reinforced to aid with handling. It is unusual for a thermal pad to have enough continuity to be easy to handle...
3M ISOLOSS™ Uses | Waterjet Cutting | Custom Die Cutting
At NEDC, we manufacture custom gaskets all day. One material we use to cut custom gaskets is polyurethane foam. Polyurethane foam is very popular for gap filling, gasketing, and shock absorbing applications. ISOLOSS™ is made by a 3M subsidiary E-A-R. Properties of ...
High-Strength Silicone Rubber Gaskets
At NEDC, we cut lots of gasketing materials. Silicone rubber is a go-to choice for a lot of our customers. The reasoning for this is plenty: Reasons to Use Silicone Rubber Gaskets Its high-temperature/low temperature resistant properties. It has anti-stick properties...
Silicone Rubber Gasketing Material | A-A-59588 Class 2A/2B
I thought I’d make a blog about the material any good gasket maker should recognize off the top of their head. That gasket material would be the current A-A-59588 Class 2A/2B. Everytime I see these materials, I smile because I know that there's a good chance we have...
GAP PAD TGP HC3000 aka Gap Pad HC3.0, Die-Cut, Custom Cut Shapes
Whenever a customer comes to me looking for a middle of the road option available in today's world, that is: -Soft & Compliant -Low Outgassing -Available in many thickness options(ranging from .010'' to .125'' in thickness) -Economical, yet good thermal...
EVs(Electric Vehicles) & Thermal Pads
In February, I just took possession of an electric vehicle. It got me thinking, electric vehicles use a lot of thermal interface material, don’t they? Batteries are the life, and blood of electric vehicles. They control the entire car; air conditioning, heating,...
Henkel Announces New Ultra-Low Modulus Product | GAP PAD TGP 12000ULM
Henkel has launched the Gap Pad TGP 12000ULM under their Bergquist product line. This silicone material is filled with thermally conductive particles to impart the highest thermal conductivity to date of 12 W/m-K. This is an exciting development for the Gap Pad...
Thermal Pad/Choosing a Thermal Pad – Case Study
In our last blog, we discussed 3 tips to choosing a thermal gap filling pad. We wanted to show how that worked in a previous application. The below is a case study that utilizes a few of those tips. The Problem: A customer came to us looking for an thermal management...
3 Tips for Selecting a Thermal Gap Filler Pad!
Many of our customers are using thermal pads nowadays. With another year in the books, the electronics used this year are at an all-time high. This requires more cooling! To finish off the year, we thought we would make a blog about a few tips on choosing a thermal...
What do we make at NEDC?
A lot of times when I’m explaining to someone what I do for a living, I almost feel like saying “I play with giant cookie cutters all day.” We Use Giants Cookie Cutters, why say this? To most people it seems hard to explain that our customers just send me a print and...
Outgassing of Thermal Pads | ASTM E595 | TML & CVCM
One of our tips for selecting a thermal pad is selecting a thermal pad that has a lot of data about it. Some of these data points include, thermal conductivity, volume resistivity, flame rating, Young's Modulus, and more. However, one common question when it comes to...
Sponge/Foam Rubber Blends | Die-Cut, Waterjet-Cut, Lamination
Closed Cell Sponge/Foam rubber materials have a place in the industry. Oftentimes they are used in applications where either for vibration dampening, or gasketing where not much compression force is available. However, there are also times where the environmental...
ITW Formex | Die-Cut/Laser-Cut Parts | Scored, Formed, Bent, Cut
Electrically Insulating materials are a common die-cut product here at NEDC. One of the more common materials we use is ITW Formex. These insulating plastic materials are used in a number of electrically isolating applications. They are flame retardant, and are...
Reinforced Silicone Rubber Gaskets | Silicone Solid, Sponge Rubber
One of the issues in die-cutting is what we call “thin walls” this occurs when there is a hole close to the wall of a part. We typically implore our customers to allow for “break-out” if possible. However, when a gasket is reinforced, it can make this problem easier...
Thermal Insulation | Silicone Foam Rubber Materials
At NEDC, thermal management is close to our core as a company. Most times when companies think of thermal management, they think of Thermal Gap Filler products. The opposite problem to solve is making sure heat doesn’t go in a certain direction. Gap Fillers direct it,...
Bonding O-Rings, Unique Shapes | Silicone | Fluorosilicone Rubber
NEDC fabricates all types of different gaskets. One of common types of gaskets NEDC manufactures are the notorious “O-rings”. There are a few ways to fabricate gaskets. The first is to die-cut/waterjet-cut/laser-cut them. Mold them with what can be an expensive...
AquaPro™ PORON® by Rogers Corporation | Water Sealing Polyurethane Foam
At NEDC, watertight seals are a common product we sell. Customers come to us for all sorts of gasketing materials that are good for watertight seals, including silicone rubber, neoprene, and other commonly known gasketing type materials. Separately, customers...
All of the information presented above is believed to be factual and accurate; however, NEDC is not liable for any design or application utilizing this information.
New England Die Cutting
Capabilities/Products
Quick Links
Popular Blog Posts
Double Coated Tape 3M 9731- Acrylic/Silicone
We are an authorized 3M Converter at NEDC. As a result, we work with many of their tape products. These include VHB Tapes, EMI Shielding Tapes, Transfer Tapes, and many others. One of the tapes we work with often is 3M 9731 Double Coated Tape. This tape has the great...
Sil-Pad 900S Thermal Pad | Thin Thermal Pad | Custom Die Cut Shapes
NEDC has been die-cutting thermal pads since its inception in 1982. One of the more popular products Sil-Pad 900S by Henkel’s Bergquist. It is one of the most commonly die-cut materials NEDC converts. This product is part of the Sil-Pad family, featuring great thermal...
Silicone Gaskets, Pads- Silicone Foam, Sponge, Solid, EMI/RFI Shielding
At NEDC, we offer an incredibly wide range of materials. High performing materials such as silicone rubber is one of them. The reason for this is because silicone has countless incredible properties. These include great electrical properties, high & low...