Product Details

At NEDC, we die-cut a lot of thermal interface materials (TIMs). Cost is always a concern when customers are selecting thermal pads. When selecting an .015’’-.020’’ thin thermal pad, Sil-Pad A2000 is a good choice. 

thermal interface pad Sil Pad TSP A3000

thermal interface pad SIl-Pad A2000

Why Select Thermal Interface Pad Sil-Pad A2000? 

I’m going give a few reasons:

  • It comes in two thickness options that is between a “Gap Pad” and a “Sil-Pad” -.015’’ and .020’’
  • It has great thermal performance 
  • It comes in rolls, unlike its counterpart Sil-Pad 2000- allowing for larger thermal preforms, and overall more affordable cost structure
  • It has nearly all the same properties as Sil-Pad 2000, silicone base, fiberglass carrier, good UL rating, etc.  (Both Sil-Pads 2000, and Sil-Pad A2000 come UL 94V0.)

Sil-Pad 2000 vs Sil-Pad A2000? Are they the same?

I was going to write a blog on this, but I thought it would be better to have a note in here. I have the same exact note in my Sil-Pad 2000 blog. A lot of times customers confuse Sil-Pad 2000 with Sil-Pad A2000. They are different materials. One may ask, what are the differences? 

  • The Outgassing with Sil-Pad A2000 on the TML(Total Mass Loss) is slightly higher
  • Sil-Pad A2000 is available only .015” and .020”, while Sil-Pad 2000 is available slightly thinner at .010”.
  • Thermal Conductivity is better with Sil-Pad 2000, but only slightly.. Honestly, I might discount that a little bit more because thermal conductivity is an indicator – not necessarily a performance metric that can be depended on. 
  • Dielectric Constant is slightly better for Sil-Pad A2000
  • The thermal performance and thermal impedance are essentially neck, and neck with Sil-Pad 2000 being slightly better.

Well its always a good idea to test in the application, Sil-Pad A2000 can be considered a good alternative to Sil-Pad 2000 for thermal applications. 

Nomenclature 

SPA2000-0.015-00-1012 (No PSA, .015” thick)

SPA2000-0.020-00-1012 (No PSA, .020” thick)

SPA2000-0.015-AC-1012 (PSA- Pressure Sensitive Adhesive, .015” thick). 

SPA2000-0.020-AC-1012(PSA-Pressure Sensitive Adhesive, .020” thick)

SIL PAD TSP A3000

Note: SPA2000 is only available 10” wide, not like other Sil-Pads that are usually 12” wide.

More Information/Cutting 

Sil Pad A2000 comes in a soft white color with blue liner on both sides of the Sil-Pad. NEDC die-cuts, and waterjet cuts thermal pads for customers. For more information on thermal interface pads, or you think your application could utilize a thermal pad like Sil Pad TSP A3000. Sil Pad A2000 can be provided with an adhesive backing to aid in assembly.