Laser Cutting Services
Epoxy Preforms, Tapes, and Shim Stock
-No tooling cost
With conventional die cutting, unique shapes can be expensive in tooling cost. With laser cutting no tooling cost is required, because there is no tool, except the laser itself!
-Simple DXF allows for easy cutting
Laser Cutting requires only an electronic file such as a DXF to function. These files give the machine instructions of how to cut, when to cut, and where to cut.
-Highly precise tolerancing
With conventional die cutting, meeting certain tolerance expectations on highly complex parts can be a challenge. However, tolerancing has never been tighter on laser cutting machines. Our machines can provide some dimensions as tight as +/- .002” depending on the material.
-High material utilization
Part of offering laser cutting services is also to attempt to give the customer the best price possible. We can nest parts in different directions, and orientations to make the best possible use of the material we have. Some materials can be expensive, so material utilization becomes very important.
-Lots of room for adjustments because of no tooling
One of the downsides of using conventional die cutting is that once the tool is made it can be difficult to adjust. For example, if a diameter is the wrong size, we may be able to fix it but sometimes we cannot. With laser cutting you can easily adjust things to make them smaller, bigger, longer, or wider. Nothing is set in stone with laser cutting software. This can be a huge benefit when cutting prototypes.
-Low quantity runs
We would not say laser cutting machines do not move fast. However, laser cutting oftentimes hits it stride at lower quantity runs. With lower quantities, the mix of no tooling cost, room for adjustment, and high material utilization produces a large value proposition.
Products & Materials:
High-Performance Tapes
At NEDC, we are an authorized converter for the 3M Company. We have access to procure many tapes such as VHB Tapes, Transfer Tapes, Double Sided Tapes, and other unique tape configurations. We utilize our laser cutting services to cut these tapes for our customers. Oftentimes, we use our laser cutting machines to be able to kiss-cut parts. We cut parts to liners to make them easy for our customers to remove off during assembly.
Some common 3M tapes we cut on our laser include:
-VHB 3M 5952, 4941, 5909, 5907 and others
-Transfer Tapes 3M 9472, 467MP, 9469PC, 9485PC, 9471LE, 9472LE and others
-Double Sided Tapes 3M 7945MP, 415, and others
Epoxy Film Adhesives
One of the materials that utilizes our laser cutting services fairly often is Ablefilm®. Ablefilm® and other frozen epoxy film adhesives can be laser cut with these machines. Laser Cutting is one of the only to cut these film adhesives. To produce the small diameters, and interesting, dynamic curves that some circuit boards provide, laser cutting may be necessary. These adhesive films are normally on the thinner side- going as low as .002”. Laser Cutting enables a wide amount of latitude on what is possible to be cut. These can include:
-Tight Tolerancing
-Small Diameters
-Small Preforms
-Many Diameters
-Unique Cutouts
These Ablefilm® products may include 5025E, ECF561E, CF3350, 5020K, and 550K.
Kraft Papers
Paper products traditionally do very well during the laser cutting process. Kraft Paper is also a great candidate for our laser cutting machine. We can cut Kraft Paper, Fishpaper, and Vulcanized Fiber. These materials come in different densities, weights, and specifications.
Plastic Shim Stock
We use laser cutting services to cut many thin plastic like materials. One of the more popular materials is thin polyester(PET, or PETG). These materials are usually color coded to designate thickness. In addition, some other materials besides polyester can be used as shim stock. Not all plastics can be cut on our laser cutting machine but many can be.
NEDC owns and operates several laser cutting machines. As part of our laser cutting services, NEDC is use to demanding requirements placed on parts. As a result, these lasers operate with very precise accuracy, carrying the ability to hold some parts within a +/- .002” tolerance. It is good to keep in mind that laser machines are limited to a certain thickness of all materials. The ability to cut thick materials on a CO2 laser is also a function of the amount of the power the laser is able to produce.
However, it is good to keep in mind that while laser cutting can be a solution of a lot of challenges, there are some materials our laser has trouble with. These materials include metals, thicker plastics, and other materials. For more information on laser cutting or you believe you have a part could be potentially laser cut, please contact sales@nedc.com.
Laser Cutting Blog
Garlock BLUE-GARD Gasketing Options | Waterjet/Die-Cutting
At NEDC, engineered options are our thing. In this blog, we wanted to discuss all of the Garlock options that are under the BLUE-GARD® brand. These materials are non-asbestos, aramid fiber gaskets that are compressed with different binders. Popular Garlock BLUE-GARD®...
Previous Posts
Liners for Die-Cutting – Why is there Thick, or Thin Liners?
NEDC is an authorized converter for 3M company. For that reason, we often...
Application Note for Speaker Gasket Found In Airport
When people ask me what I do for a living, I'll be honest- I struggle...
Tips/Tricks to Avoid Supply Chain Disruptions | Custom Die-Cutters
In this supply chain taxed environment, I thought I’d write a blog about...
3M 200MP Tape Series | Double Coated/Transfer/Double Linered | Die-Cut/Laser-Cut
It is not often you hear someone say they have a “favorite tape”. However as an authorized 3M converter, I’m not afraid to say it- I love 200MP by 3M. 3M 200MP is an adhesive that is coated onto a number of carriers, and liners that yield a number of different tape...
STAYDRY® H2-3000 | Die-Cutting/Contract Assembly
NEDC die-cuts a lot of different types of materials. I often say a material is unique, because it's true they are all unique. However, one material that does not have peers is truly unique in its own rite. STAYDRY® H2-3000 manufactured by Macdermid Alpha is a Hydrogen...
Sil-Pad Die-Cut Configurations | SIL PAD TSP
At NEDC, we cut a lot of custom parts. However, it is much more common to cut parts that are made to a specification or standard. In our M83528/004XDDD post, we talked about Standard Connector Gaskets. In this blog post, we talk about Standard Sil-Pad Configurations....
Sil- Pad 800 AKA SIL PAD TSP 1600 | Die-Cutting
Sil-Pad 800 is a thermally conductive pad that belongs to the Sil-Pad family. It is a thermally conductive silicone rubber that is reinforced with a fiberglass carrier. It is electrically isolating while also having a compliant surface conducive to use in both high,...
Silicone Rubber Gasketing Material | A-A-59588 Class 2A/2B
I thought I’d make a blog about the material any good gasket maker should recognize off the top of their head. That gasket material would be the current A-A-59588 Class 2A/2B. Everytime I see these materials, I smile because I know that there's a good chance we have...
What do we make at NEDC?
A lot of times when I’m explaining to someone what I do for a living, I almost feel like saying “I play with giant cookie cutters all day.” We Use Giants Cookie Cutters, why say this? To most people it seems hard to explain that our customers just send me a print and...
Sponge/Foam Rubber Blends | Die-Cut, Waterjet-Cut, Lamination
Closed Cell Sponge/Foam rubber materials have a place in the industry. Oftentimes they are used in applications where either for vibration dampening, or gasketing where not much compression force is available. However, there are also times where the environmental...
ITW Formex | Die-Cut/Laser-Cut Parts | Scored, Formed, Bent, Cut
Electrically Insulating materials are a common die-cut product here at NEDC. One of the more common materials we use is ITW Formex. These insulating plastic materials are used in a number of electrically isolating applications. They are flame retardant, and are...
Reinforced Silicone Rubber Gaskets | Silicone Solid, Sponge Rubber
One of the issues in die-cutting is what we call “thin walls” this occurs when there is a hole close to the wall of a part. We typically implore our customers to allow for “break-out” if possible. However, when a gasket is reinforced, it can make this problem easier...
AquaPro™ PORON® by Rogers Corporation | Water Sealing Polyurethane Foam
At NEDC, watertight seals are a common product we sell. Customers come to us for all sorts of gasketing materials that are good for watertight seals, including silicone rubber, neoprene, and other commonly known gasketing type materials. Separately, customers...
Top 3 Reasons to Choose PORON for your Gasket! | Dust Sealing
At NEDC, dust seals, and gaskets are a main product we offer our customers. It can be difficult to find an effective gasket that meets your price range, but is also tough enough to get the job done with little hassle. Luckily, Rogers PORON® gets the job done. In this...
Tolerancing for Thermal Pads | Thickness, Diameter, Linear Dimensions
One difficult thing for the team is when a tight tolerance is put on a thermal interface material. Some of our customers understand, gap filling materials are putty like. Alternatively, thin thermal pads are usually coatings coated on a reinforcement layer such as...
All of the information presented above is believed to be factual and accurate; however, NEDC is not liable for any design or application utilizing this information.
New England Die Cutting
Capabilities/Products
Quick Links
Popular Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.