Introduction
In the world of thermal management, the Gap Pad 1500S30, also known as Gap Pad TGP 1300, is a standout thermal interface material (TIM) engineered for demanding electronic applications. Trustworthy, conformable, and easy to use, it’s ideal for delicate heat-dissipation scenarios.
What It Is
The Gap Pad TGP 1300 is a silicone-based, fiberglass-reinforced gap filler widely recognized for exceptional compliance and performance in electronic thermal solutions. Its soft, elastic nature enables it to bridge uneven surfaces flawlessly, even when rough or irregular.
Key Features & Technical Specs
-
Thermal Conductivity: Approximately 1.3 W/m·K, balancing performance with flexibility.
-
Ultra-Conformable (Soft “S-Class”): The low hardness ensures excellent wet-out, and minimal strain on fragile components.
-
Fiberglass Reinforcement: Enhances puncture, shear, and tear resistance, improving durability and ease of handling.
-
Inherent Tack on Both Sides: Eliminates the need for adhesives, preserving thermal performance.
-
Operating Temperature Range: Functional from –60 °C to +200 °C, adaptable for wide-ranging environments.
-
Electrical Properties: Dielectric strength over 6,000 VAC, dielectric constant of 5.0 @ 1 kHz, and volume resistivity of 1 x 10¹¹ Ω·m.
-
Safety Standards: UL 94 V-0 flame rating confirms its compliance in safety-critical electronics.
Typical Uses
Gap Pad TGP 1300 is used across a spectrum of heat-critical applications, such as:
-
Between heat-generating semiconductors and heatsinks
-
In computers, telecommunications gear, and peripherals
-
Shielding devices, power modules, and more
Comparison Within the S-Class Family
As part of the “S-Class” series of soft gap pads, the TGP 1300 sits amid several options for varying thermal needs:
-
TGP 1300 (Gap Pad 1500S30) – 1.3 W/m·K (pink)
-
TGP 2000 – 2.0 W/m·K (gray)
-
TGP 2400 – 2.4 W/m·K (yellow)
-
TGP 3000 – 3.0 W/m·K (light blue)
-
TGP 5000 – 5.0 W/m·K (green)
This offers engineers flexibility—choosing the TGP 1300 is ideal when you need soft compliance paired with modest conductivity.
Configurations & Sizes
Gap Pad TGP 1300 is available in standard sheet form (8″ × 16″) with thicknesses ranging from 0.020″ to 0.250″ (approx. 0.5 mm to 6.35 mm). Its inherent tack makes it easy to handle and install, without requiring additional adhesives.
GP1500S30-0.020-02-0816 (.020” thickness)
Gp1500S30-0.040-02-0816 (.040” thickness)
GP1500S30-0.060-02-0816 (.060” thickness)
GP1500S30-0.080-02-0816 (.080” thickness)
GP1500S30-0.100-02-0816 (.100” thickness)
GP1500S30-0.125-02-0816 (.125” thickness)
GP1500S30-0.160-02-0816 (.160” thickness)
GP1500S30-0.200-02-0816 (.200” thickness)
GP1500S30-0.250-02-0816 (.250” thickness)
Why It Stands Out- Gap Pad TGP1300
Gap Pad TGP 1300 shines when an application demands:
-
Gentle contact with fragile components
-
Minimal thermal resistance due to conformability
-
Reliable, durable structure with its fiberglass core
-
Ease of installation, thanks to tack on both surfaces
More Information/Die Cutting
NEDC does custom die cutting for many customers including aerospace, and medical. For more information, please contact sales@nedc.com.