The Better Way to Bond
3M™ VHB™ Tape eliminates screws, welds, and rivets with a clean, permanent acrylic-foam bond that distributes stress and improves appearance. The RP-Series is a versatile choice for bonding metals, plastics, and painted surfaces across appliance, electronics, transportation, and signage applications.
Why Choose the RP-Series?
| Benefit | What It Means for Assemblers |
|---|---|
| Multi-purpose acrylic adhesive | Reliable bonds to commonly used industrial substrates |
| Conformable acrylic foam core | Fills slight gaps and dampens vibration |
| Cleaner assembly | No drilling, welding, grinding, or visible fasteners |
| Faster throughput | Immediate handling strength — no cure time needed |
| Aesthetics and durability | Smooth, long-lasting bonds indoors and outdoors |
RP-Series Product Comparison
| Product | Thickness | Color | Liner Options | Typical Uses |
|---|---|---|---|---|
| RP16(F) | 0.016 in (0.4 mm) | Gray | Paper or Film | Thin, flush bonds |
| RP25(F) | 0.025 in (0.6 mm) | Gray | Paper or Film | Appliances, control panels |
| RP32(F) | 0.032 in (0.8 mm) | Gray | Paper or Film | Displays and painted metals |
| RP45(F) | 0.045 in (1.1 mm) | Gray | Paper or Film | Gap-filling, structural trims |
| RP62(F) | 0.062 in (1.55 mm) | Gray | Paper or Film | Higher vibration loads |
(F) nomenclature stands for film liner. Otherwise these tapes will come with a paper liner.
Representative Performance Data
| Property | RP16 | RP25 | RP32 | RP45 | RP62 |
|---|---|---|---|---|---|
| Peel Adhesion (Stainless Steel) | 12 lb/in | 17 lb/in | 18 lb/in | 20 lb/in | 20 lb/in |
| Normal Tensile Strength | 95 psi | 90 psi | 85 psi | 85 psi | 80 psi |
| Dynamic Shear Strength | 90 psi | 80 psi | 75 psi | 70 psi | 70 psi |
| Temperature Resistance | Short-term up to 250°F; long-term up to 200°F |
Foam density: ~45 lb/ft³. Gray color across the family.
Application Guidance
| Condition | Recommendation |
|---|---|
| Ideal application temperature | 70–100°F (21–38°C) |
| Surface prep | Clean with 50:50 IPA and water |
| Time to full strength | Allow ~72 hours dwell |
| Recommended storage | ~70°F (21°C), 50% RH |
| Shelf life | 24 months from shipment |
Why Die-Cut VHB from NEDC?
We supply VHB tapes ready for production — clean, accurate, and fast to apply:
-
Kiss-cut rolls for fast assembly
-
Custom shapes including windows and pull-tabs
-
Clean-room converting available
-
Tight tolerances and consistent repeatability
-
Less labor, less scrap, higher throughput
You get the full benefit of VHB without the trimming, waste, or manual cutting.
Additional 3M VHB Options We Also Offer
| 3M VHB Family | When to Use It |
|---|---|
| VHB LSE Series | Low-surface-energy plastics such as PP, TPO, or tough powder coats |
| VHB MAX Series | Maximum strength and enhanced temperature and impact resistance |
| Thicker conformable VHB types | Significant surface mismatch or vibration reduction needs |
If RP fits — we offer it.
If your application demands something more — we have that too.